以短链季铵盐/脂肪酸盐为模板合成超微孔二氧化硅

超微孔材料具有1~2 nm的孔径,在分离、催化应用中有望展现出择形催化的能力。 寻找经济、简便的合成超微孔材料的表面活性剂体系是一项有意义的工作。 本研究以短链季铵盐(十烷基三甲基溴化铵,记为C₁₀TAB)和不同链长脂肪酸酸盐混合胶束为模板剂,硅酸钠为硅源,成功制备出高度有序超微孔SiO₂。 通过小角X射线衍射、N₂吸附-脱附、傅里叶变换红外光谱、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等技术手段对产品的结构和性能进行了表征。 结果表明,合成体系中脂肪酸盐碳链长、加入量、晶化温度等对产物孔道有序性有很大影响。 当选择正辛酸钠(SO)为助表面活性剂,当n(C₁₀TAB):n(Na₂SiO₃):n(SO):n(H₂O)=1:1.5:0.3:800,晶化温度为80 ℃时,可以得到高度有序超微孔SiO₂。 煅烧后样品比表面积为1300 m²/g,孔体积0.49 cm³/g,孔径分布在1.90 nm。     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

Phenol methylation over CrPO4 and CrPO4?AlPO4 catalysts

The vapor-phase catalytic alkylation of phenol with methanol and dimethyl carbonate on a series of differently prepared CrPO₄ (Cr/P=1) and CrPO₄-AlPO₄ (CrAIP) catalysts, has been studied at different temperatures (473–673 K). The reaction is first order in phenol, giving a mixture of O- and C-alkylated products (C-alkylation taking place preferentially at theortho-position). Moreover, dimethyl carbonate is a better methylating agent than methanol.     

溴化锌-季(鎓)三溴盐催化二氧化碳和环氧化合物偶联反应

研究了溴化锌-季鎓三溴盐催化二氧化碳和环氧化合物偶联反应,考察了反应温度、压力和不同金属盐对反应的影响以及催化剂的循环使用性能.结果表明,在413 K和1.0 MPa条件下,以溴化锌为催化剂,苯基三甲基三溴化铵为共催化剂,无需加入任何溶剂就可以使二氧化碳和环氧化合物发生偶联反应,并以很高的收率得到环碳酸酯.     

一种新颖有机-无机杂化配位聚合物[(C10H16N)2（Pb2I6）·2DMF·H2O]n的自组装合成和晶体结构(英)

A novel coordination polymer [(C₁₀H₁₆N)₂（Pb₂I₆）·2DMF·H₂O]_n (C₁₀H₁₆N=N-butyl-2-Methy-Pyridinium) was synthesized by the reaction of Pb(NO₃)₂ with C₆H₁₀NI at room temperature in DMF solvent and structurally characterized by means of X-ray single diffraction. The title compound crystallizes in triclinic system, space group P1 with a=1.1237(2) nm, b=1.25330(16) nm, c=0.808 00(12) nm, α=102.523(4)°, β=92.475(5)°, γ=95.712(10)°, V=1.102 9(3) nm³, Z=1, D_c=2.470 Mg·m^-3, F(000)=738, chemical formula C₂₆H₄₈N₄O₃Pb₂I₆ and M_r=1 640.46, μ（MoKα）=11.849 mm^-1, the final R=0.057 8 and wR=0.166 5 for 3716 observed reflections with I > 2σ(I). The title compound consists of cations ([(C₁₀H₁₆N)⁺] and anion chain(PbI₃^-),they are combined by static attracting forces in the crystal. DMF and H₂O locate between the organic and inorganic moiety. CCDC: 210812.     

马来酸酐封端聚碳酸亚丙酯的大分子偶联反应

自从 1 969年井上祥平[1] 发现二氧化碳 (CO2 )可以同环氧化合物直接共聚合成脂肪族聚碳酸酯(APC)以来 ,这一学科领域受到科学家的广泛关注[2～ 8] .这是因为CO2 所产生的温室效应 ,成为使全球变暖的主要因素[9,10 ] .已经确定CO2 使气侯变暖占诸多因素中的 66% .目前大气中CO2 的体积浓度为 345ppmv,由于人类的各类活动每年以 1ppmv的速度递增 .因此 ,降低CO2 排放量已成为全人类共同关注的热点之一 .另一方面 ,CO2 的固定化以及消耗、利用显然是一个应积极鼓励的研究课题 .目前人们已经将CO2 同环氧乙烷 (EO)、环氧丙烷 (PO)、环…     

碳酸盐前驱物制备Y2O3超细粉及透明陶瓷

以Y(NO3)3和NH4HCO3为原料,通过向Y(NO3)3溶液中滴加NH4HCO3的方式制备了化学组成为Y2(CO3)3·2H2O的先驱沉淀物。研究了先驱沉淀物煅烧过程中的物相变化。先驱沉淀物1100℃煅烧4h后得到了平均粒径为60nm的无团聚Y2O3超细粉体。所得粉体不添加任何添加剂,在1700℃下真空烧结4h得到了透明Y2O3陶瓷。     

Silver(I) Complexes with Nitrogen-Containing Noncyclic, Macrocyclic, and Macrobicyclic Ligands in Propylene Carbonate

Stability constants and thermodynamic data for complex formation of silver(I) with noncyclic, macrocyclic, and macrobicyclic ligands have been measured in propylene carbonate using potentiometric and calorimetric methods. All ligands containing two nitrogen donor atoms form extremely stable complexes. Only if substituents reduce the basicity of the nitrogen donor atoms, the stability of the complexes decreases drastically. However, the cryptand (221) forms the most stable complex of all ligands examined. In this case, the dimensions of the ligand cavity and of the cation are nearly identical.     

季铵盐固相催化使聚氯乙烯脱HCl

通过将季铵盐与聚氯乙烯(PVC)混溶成膜,使其在固相脱HCl,研究了催化剂对PVC脱HCl反应速度和产物结构的影响以及固相反应与温度、时间的关系.发现在催化性能上下基铵盐比乙基铵盐好得多,根据实验结果提出了季铵盐通过分解成叔胺实现催化的机理.